About Us

Major Projects

  • UAECrushing- & Screening Plant designed by QM for feed of 3500 t/h limestone 0-400mm to produce 2800 t/h of 0-5/5-10/10-20/20-32mm. Existing of 2 grizzly screens, 11 screens, chute work, silos, 6 KLEEMANN impact crushers and about 60 conveyors with STIEBEL GearMotors. Steel structure, chute work and conveyors been engineerd, manufactured and installed by QM
  • UAE600 t/h Primary Crushing Plant & 475 t/h Secondary Crushing & Screening Plant designed & installed by QM for feed with limestone 0-1200mm to produce 0-5/5-10/10-20/20-32mm. Existing of 1 KLEEMANN primary crusher SStR 1250, 2 big screens, chute work, silos, 1 KLEEMANN impact crusher SNH20 and all steelwork, chutes, conveyors with STIEBEL GearMotors and filter plant of FAV VOLLERT KG
  • KSASteel hut, respectively stock pile cover for Primary Crushing plant (dust suppression)
  • UAE Installation of additional sorting plant consisting of sorting room, several conveyors with STIEBEL GearMotors with steel work and chute work
  • KSASupply of processing plant for separating rock with magnesite content, capacity of 50 tph which consist of 9 conveyors with STIEBEL GearMotors, steel hoppers, KLEEMANN screens, vibra¬tion feeders and FAV VOLLERT filter plant.
  • KSA Installation of industrial equipment and factory machinery and various steel work.
  • UAE 3744 meter downhill land conveyor with 3500/4500 t/h capacity for pre crushed lime stone of size 0-400 mm. Complete system with PLC controls been designed by QM Engineering Department. Belt will be slowed down through frequency control system, to adjust speed. The potential energy is utilized while the conveyor belts are breaking regenerativly and the energy gained is fed back into the power grid. Total installed power for conveyor system = 4,072 KW, while total power for complete system (panel boards & plc supplied by us) = 8,100 KW
  • KSA 600/550 t/h Crushing- & Screening Plant with crushers, screens, feeders, PLC control. Layout planning, design and manufacturing of all steel works, chutes, conveyors done by QM. Including encapsulation and complete Filter unit with duct work and silos. Turn-key erection by QM. Plant feed 0-1200mm, final size = 0-4mm/4-10mm/10-20mm, plus partial 30-60mm/40-80mm. Plus conveyor system to additional stockpile and conveyor system to feed kiln and processing plant.
  • EgyptInstallation and erection work for Gypsum board factory in Suez/Egypt. Complete board line with dryer, preparation station and gypsum tower.
  • UAE2500 t/h Crushing- & Screening Plant designed by us for feed with limestone0-400mm toproduce maximum quantity of 40- 80mm, existing of 2 grizzly screens,4 screens, chute work, silo, 4 jaw crushers and 22 conveyors. All steel structure,chute work and conveyors been engineered and manufactured by us. 6 screens and4 jaw crushers been provided by Client, but complete unit been erected by QM.
  • UAESupply of KLEEMANN sand mill with capacity of approx. 60 t/h, to produce max. amount of 0-5mm. Feed size 5-20 mm lime stone.
  • KSA600 t/h Crushing- & Screening Plant with crushers, screens, feeders, PLC control and layout planning from KLEEMANN. Engineering, design and manufacturing of all steel works, chutes, conveyors done by QM. Including encapsulation and complete Filter unit with duct work and silos. Turn-key erection by QM. Plant feed 0-1200mm, final size = 0-4mm/4-10mm/10-22mm, plus partial 22-35mm/35-50mm/50-60mm.
  • UAEDe dust filter unit for feed hopper of raw gypsum, including complete encapsulation and hood.
  • TURKEYDismantling, conservation and packing of used production line for gypsum boards.
  • UAE Amendment of existing crushing plant section. Replacement of impact crusher by vertical shaft impact crusher and addition of 2 conveyor belts, adding all needed steel structure work.
  • UAEAmendment of existing crushing plant section by adding 2 KLEEMANN jaw crusher of feed size 1100x700mm to produce max. quantity of 40-80mm limestone, including hopper, chutes steel structure and conveyors.
  • UAEConveyor system for raw gypsum with capacity of 150 t/h, with hopper, extractionbelt, inclined conveyor with 433 meter length to feed 28 meter high into 1500 storage silo with 1500 ton capacity which also been built by us.
  • UAE Installation and erection work for Gypsum board factory. Complete board line with dryer, preparation station and gypsum tower.
  • UAEFabrication and erection of 3 steel silos for Gypsum factory, one silo with diameter of 8000 mm and total height of 25 meters, one silo with diameter of 3440 mm and onewith diameter of 3200mm.
  • UAE550 t/h Crushing- & Screening Plant with crushers, screens, from KLEEMANN. General lay out and engineering, design and manufacturing of all steel works, chutes, conveyors done by QM. Including encapsulation and complete Filter unit with duct work and silos. Turn-key erection by QM. Plant feed 0-1200mm of dolomite, final size = 40-80mm for lime production and under-size to be crushed into 0-4mm/4-10mm/10-20mm. All finished product sizes to be stored in silos.
  • UAE1000 meter downhill land conveyor with 3000 t/h capacity for pre crushed lime stone of size 0-400 mm. Complete system with PLC controls been designed by QM Engineering Department. Belt will be slowed down through frequency control system, to adjust speed. The potential energy is utilized while the conveyor belts are breaking regenerativly and the energy gained is fed back into the power grid.
  • UAEUpgrade of existing KLEEMANN ship loader from 1000 t/h to 3000 t/h. Exchange of all drive units, installation of new hopper, new slide gates and level controls and electronic PLC controls to control and optimize the feed system.
  • UAE2.455 meter long “land conveyor system” with a capacity of 2000 t/h for0-400mm primary crushed rock. The project includes two massive stock piles (covered), 1000 ton steel silos and various technical solutions.
  • UAE400 t/h KLEEMANN Crushing- & Screeningplant for limestone processing, designed and erected in cooperation with the client. That plant is producing approx.400 t/h in 2-shift operation (22 hours a day). All conveyors (approx. 325 meters) and all the chutes have been designed and engineered from our in-house Design & Engineering Department and manufactured by our staff
  • UAEInstallation of Jetty Conveyor with tripper car to feed 2000 t/h barge loader with rock aggregates, mainly of size 0-5mm / 5-10mm and 10-20mm. Conveyor length is 197.6 meters and length of tripper car is 33 meters, allowing feeding barges, small ships at a length of 140 meters. The unit is powered with 2 STIEBEL gear motors, each 75 KW. Jetty Conveyor with tripper car and barge loader is travelling alongside the berth in order to load small ships and barges.
  • UAE1000 t/h KLEEMANN Crushing and Screening plant for limestone processing designed and erected in cooperation with the client. That plant is producing 1200 - 1300 t/h in2-shift operation (22 hours a day). All steel work, conveyors (approx. 980 meters) and all the chutes have been designed and engineered from our in-house Design & Engineering Department.
  • UAE 350 t/h KLEEMANN plant designed to produce aggregate sizes to suit the requirements of asphalt manufacture. The main components supplied by KLEEMANN; Quarry Mining supplied conveyor belts and steel structure/chutes etc for the remainder of the plant. The plant is producing about 50% more than originally advised.
  • UAE700t/h KLEEMANN plant designed for limestone production a crushing and screening plant which produces aggregate sixes for use in concrete manufacture
  • UAE An identical plant with 700 tph capacity as the one described above has been supplied to another Client. Both of these plants were manufactured and erected in Fujairah UAE and met the schedules agreed with the customer. These plants today are producing at a rate which matches the design capacity
  • UAE1000 t/h KLEEMANN primary jaw crusher supplied as used equipment into an existing limestone primary application. This plant has operated at design plant capacity with high availability since installation in 2003
  • UAE 700 t/h KLEEMANN primary jaw crusher operating in a Gabbro operation plus two secondary impact crusher units with a total capacity of 500 t/h
  • UAE430 meter long field conveyor with capacity of 300 t/h
  • UAE500 t/h KLEEMANN crushing and screening Plant for lime stone production this quarry project was completed on the basis of turn-key installation and use of non-convential primary mobile crusher operation. Again this plant is operating at design capacity.
  • UAEKLEEMANN Primary Crusher type SStR 2100x1 600 with a feed capacity of up to 2000 t/h; 8 KLEEMANN Secondary crushing and screening plants of various size to produce a variety of aggregate sizes for domestic market and export.